The Int-Elect Single Bench Sizing Unit comprises of:

Cylinder

  • Parker Industrial 2" Cylinder
  • Bore to fit Magneto restrictive position transducer internally
  • Bosch Servo solenoid valve 24 LPM
  • 2 metres of hose and fittings
  • Bore: 2" Parker Industrial
  • Tie Rod construction Rod: 1 ¼" (Bored for Position Transducer)
  • Length: (by customer)
  • Style: Trunion Mount (position by customer)
  • Clevis: 1" pin
  • Valve Block: C Top 3

Operation Console (Inside)

  • AB CompactLogix
  • DC Power Supply

Operator Console (Lid)

  • Console Size: W = 380mm, H = 300mm, D = 210mm
  • 10 Size Push buttons & LED's 
  • Group A or B Toggle giving 20 sizes 

Operator Interface:

Allowing alteration of-
  • Change Push Button Sizes
  • Zero and span adjustment 
  • Kerf adjustment 
  • Over cut/Under cut adjustment 
  • Sizing Program Selection (1-4)
Monitors-
  • Push Button Sizes
  • Kerf
  • Over cut
  • Size Programs and Group
  • Actual cylinder position 
  • Position Transducer Voltage 

Hydraulic Power Pack

  •  4 kW Electric Motor 
  • 16 cc Bosch whisper valve pump 
  • Pressure and return filters 
  • Pressure gauge 
  • Level gauge
  • Tank: 80 litres
  • Electric Motor: 4 KW, 415 volt, 3 phase, FLC
  • Pump: 16cc Vain Pump (flooded suction)
  • Pressure: 1000 psi
  • Pressure Filter: 10 micron
  • Return Filter: nominal 5 micron
  • Flow: 24 LPM

Transducer

  • Magneto Restrictive 
  • Supply: 24 V DC
  • Signal: 0-10 V
  • Resolution: Infinite
  • Repeatability: Equal to resolution
  • Non-linearity: ±0.02 % or ±0.05 mm, whichever is greatest 

Cylinder Position Specifications:

  • Speed: 200 mm/sec
  • Accuracy: ± 0.1 m
  • Repeatability: ± 0.1 m
  • Force: 1,500 kg
  • Setting Speed: 25 m to 100 m in 0.95 sec
  • (including Accel & Decel times)

 * Due to availability, products may vary slightly